How to Improve Repair Communication Between Tenants, Contractors and Your Team

Tenant, contractor and manager coordinate repair access

Repair communication breaks down in the same three places: the tenant’s first report is missing details, the hand-off to a contractor is slow or vague, and nobody tells the tenant what happens next. The fix is one intake channel tenants will actually use, one record per request, one owner per open job and a standard update at every status change. Done by hand, that takes staff time that grows with every unit. Done through text-message intake and automated coordination, it scales across hundreds or thousands of units without adding coordinators.

Golando
Keep Every Repair Conversation Moving
GoLando handles tenant requests by text, coordinates approved service providers, and gives your team visibility into maintenance activity.
  • ✓Tenant maintenance requests by text
  • ✓Automated repair coordination
  • ✓Centralized maintenance dashboard
Book a Demo

TL;DR

  • Give tenants one simple way to report a problem, and collect the same details every time: unit, description, urgency and access.
  • Log every request as a ticket with a time stamp, owner, status and outcome. Some Canadian cities require exactly this for rental buildings.
  • Give each contractor a written scope, a deadline and one point of contact, then confirm completion with the tenant.
  • Classify emergencies against a written list so after-hours calls reach the right person and nobody else.
  • Automation should work alongside your existing property management software, not replace it.

Why repair communication goes wrong

Most repair delays are not caused by the repair. They come from the messages around it. A tenant phones the office, gets voicemail and sends an email later. A coordinator rewrites the problem for a contractor from memory. The contractor arrives and the tenant is not home, because nobody confirmed a window. The job closes, and the tenant never hears that it is done.

Each of those gaps adds a second or third message to a job that should have needed one. Across a portfolio, the extra messages become the workload: calls to chase, texts to reschedule, tenants asking for status. That is where maintenance staffing cost hides, and it is why communication is a better place to start than the repair itself.

There are four handoffs to get right:

  1. Tenant to your team (the report).
  2. Your team to the contractor (the work order).
  3. Contractor to tenant (access and scheduling).
  4. Everyone back to the tenant (resolution).

The rest of this guide goes through them in order.

Start with the report: make it easy and complete

A tenant will use whatever channel is least effort. If reporting means finding a portal password, downloading an app or waiting on hold, many will skip it until the problem is bigger and costlier. The first improvement is to meet tenants where they already are, which for most people is a text message.

Some Canadian municipalities already expect this kind of flexibility. Ottawa’s Rental Housing Property Management By-law (No. 2020-255) requires landlords to have a tenant service request procedure that lets tenants make requests verbally, in writing and by electronic text. Even if your buildings are elsewhere, it is a useful model of what a complete intake looks like.

Whatever channel you use, the report should capture the same fields every time:

  • Property address and unit number
  • The tenant’s contact details
  • A plain description of the problem, ideally with a photo
  • How urgent it is, and whether there is any safety risk
  • When someone can enter the unit, and whether pets are present

Contractors lose the most time when these are missing. A work order that says “toilet issue” produces a diagnostic visit. One that says “toilet runs constantly, shut-off valve works, tenant home weekdays after 5 p.m.” often produces a first-visit fix.

This is where guided conversation helps. With GoLando, the tenant texts a maintenance issue and our AI handles the conversation by SMS: it asks follow-up questions, troubleshoots the issue and identifies emergencies, with no app, portal or phone call. The questions that a good coordinator would ask are asked every time, at any hour. For more on handling the tenant side, see our guide to handling tenant repair requests in Canada.

Keep one record per request

A text thread, an email chain and a note on a coordinator’s desk are three versions of the truth. One ticket per request is the single most useful structural change you can make.

Ottawa’s guide lists what the record should hold: the date and time of the request, address and unit, tenant contact information, a description of the issue, the action taken and its outcome, and the date and method of notifying the tenant that it was resolved. Mississauga’s Rental Standards Program asks owners of rental apartment buildings for a similar work order process that also records an urgency evaluation. Check the bylaws and tenancy rules that apply in your municipality and province, since requirements differ by place.

Those fields are not only compliance paperwork. They are the communication record. When a tenant disputes how long a repair took, or a contractor claims they never got access, the ticket answers the question. Good documentation of repair requests is also central to a clear tenant maintenance request process, because a record made at the time beats a recollection later.

A practical ticket carries:

Field Why it matters
Unique ticket number Everyone refers to the same job
Date and time received Starts the response clock
Urgency category Decides who is contacted and how fast
Assigned owner and contractor Nobody wonders who has it
Status updates Lets staff answer tenants without asking around
Completion date and tenant confirmation Closes the loop with evidence

This matches the structure recommended in Canadian Real Estate Magazine’s guide to tenant service request management, which also advises an immediate written acknowledgment and keeping records for at least two years.

Set response times and say them out loud

A response standard is a communication tool. Tenants are far more patient when they know what to expect. Both Canadian examples above set timelines. Ottawa expects urgent requests to be answered within 24 hours and non-urgent requests within 7 days. Mississauga sets 24 hours for urgent requests, 72 hours for a pest infestation inspection and 5 days for non-urgent requests.

Your own standard may be tighter than a bylaw. What matters is that it is written, that the acknowledgment goes out immediately, and that staff and tenants both know it. The acknowledgment alone removes a large share of follow-up messages, because the most common tenant message after a report is “did you get it?”

Brief contractors so they arrive ready

Contractor communication is where portfolio managers feel the pain most, because the same few trades serve many buildings and every unclear message costs a visit.

Write the scope, not just the problem

Send the contractor the ticket details, the access window the tenant agreed to, and what you want back: a diagnosis, a quote above a set threshold, or completion. If your contractors have a spending limit before they need approval, write it down once and apply it to every job. This stops the back-and-forth of “can you approve this?” at 4 p.m.

Name one point of contact

A contractor who has to choose between three people to call will call none of them. Give each vendor one contact on your side and, for each open job, one internal owner responsible for the next action. Staff turnover and holidays then stop silently stalling jobs.

Put a deadline in every request

A message that asks for an update with no time attached gets answered when convenient. Ask for a status by a stated time, and decide in advance how you will escalate if it does not arrive: a text first, then a call, matched to the priority of the job. Escalation by priority keeps urgent jobs moving without making every job feel urgent.

Keep a vendor file before you need it

For each contractor, keep the business contact, service area, after-hours availability, licence or insurance details where relevant, rates and invoicing details. When a boiler fails at 9 p.m., you do not want to be building that list. If you use your own trades, your files stay yours. If you also want coverage beyond them, GoLando supports automated vendor dispatch using your own vendors or, optionally, the GoLando Vendor Network.

Batch where the work allows

Non-urgent jobs in the same building or neighbourhood can be grouped into a single visit per trade. Fewer trips means lower cost for you and fewer entries into tenants’ homes. This only works when scheduling information sits in one place, which is another argument for the single ticket.

Keep the tenant informed through to completion

The most neglected message in repair communication is the last one. A tenant whose issue was fixed on Tuesday but who was never told will log a second complaint on Friday.

A minimum update set that works at any scale:

  1. Acknowledgment when the request is received.
  2. Notice that a contractor is assigned, with the planned time window.
  3. A reminder before the visit.
  4. A completion message that asks the tenant to confirm the issue is fixed.
  5. A reopen path if it is not.

The tenant’s confirmation matters as much as the contractor’s invoice. It is the final field in the ticket, and it catches repairs that were closed too early.

Handle emergencies and after-hours without waking everyone

After-hours communication fails in two directions: a real emergency waits until morning, or a dripping tap triggers a late-night call to a manager. Both are classification problems, and both are solved by a written list rather than individual judgment.

Keep a one-page emergency list, approved by the owner. Typical items include a suspected gas leak, a major water leak that cannot be stopped at the shut-off, loss of heat in cold weather, a complete loss of power, a security failure such as a door that will not lock, and fire or carbon monoxide alarms. For anything involving gas, smoke, fire or carbon monoxide, tenants should leave and call 911 first; your process comes after safety. Everything not on the list is logged and scheduled for the next business day.

Then decide in advance:

  • Who is on call, by trade
  • How much can be spent before the owner is reached
  • What the tenant is told while help is on the way, such as how to shut off water at the main valve

With GoLando, our AI identifies emergencies in the text conversation and coordinates the response with approved service providers, so the decision about who needs to be called is made against your rules instead of at 2 a.m. by whoever picks up. We cover the wider topic in how landlords handle after-hours maintenance.

Measure the communication, not only the repairs

Once tickets carry time stamps, communication becomes measurable. The numbers worth watching:

  • Time from request to acknowledgment
  • Time from request to contractor assignment
  • Time from request to completion, by urgency
  • Share of jobs fixed on the first visit
  • Number of reopened tickets
  • Maintenance spend by property and by vendor

Review them monthly. A property with a high reopen rate has a diagnosis or contractor problem. A vendor with slow assignment-to-completion times has a scheduling problem. A building with many after-hours tickets may need a better emergency list or preventive work. None of this is visible when requests live in phone calls and inboxes.

GoLando’s central dashboard shows maintenance requests, vendor activity, property maintenance history, expenses and performance metrics, so that review does not depend on someone assembling a spreadsheet.

Automate the coordination, keep your software

Most property management teams already run a system of record for leases, accounting and tenants. Replacing it to fix repair communication would be a large project for a narrow problem. The better approach is to automate the communication layer and leave the system of record alone.

That is how GoLando is designed. It is a maintenance coordination platform, not a replacement for full property management software. It handles the text conversation with the tenant, the troubleshooting, the vendor dispatch, scheduling and follow-up, and it integrates with Buildium so established workflows stay in place. Our article on connecting maintenance to your property software explains the options.

The operational effect is on workload. Routine coordination, the part that grows linearly with unit count, is handled by the platform. Your team’s time goes to approvals, exceptions and owner relationships. That is how a growing portfolio adds units without adding coordinators in proportion.

Automate the coordination, keep your software

A worked example

A 120-unit building receives a report at 7:40 p.m. on a Sunday: “No hot water in 4C.”

By hand. The message sits in a voicemail box until Monday. A coordinator calls back, learns the tenant is a shift worker, leaves a message for a plumber and emails the owner. By Tuesday two more units have called.

With a structured text flow. The tenant texts the problem. The conversation asks whether it is the whole unit or one tap, whether the pilot light or breaker was checked, and whether there is any leak. If it is a single-tap issue, the tenant may be able to resolve it with guidance, avoiding a service call. If it is building-wide, the ticket is classified as urgent, the approved plumber is contacted, the tenant is given a window and the manager sees the whole record on Monday morning with the outcome logged.

Two repair communication paths compared

The repair is the same in both cases. The difference is how many messages, how many people and how many hours stood between the report and the plumber.

Perspective

We built GoLando on a simple observation: most property management software is good at recording maintenance and weak at doing the coordination. Someone still has to read the request, ask the tenant the missing questions, find the right vendor, arrange access and chase the follow-up. That someone is usually the most expensive resource in the building.

Our view is that repair communication should be treated as an operations process, not a courtesy. It needs one channel, one record and one standard sequence of messages, and it should run the same way at 3 p.m. and at 3 a.m. Text messaging is the channel because tenants already use it and it needs nothing installed.

We also believe it should fit the way you already work. That is why we complement your existing platform rather than ask you to replace it, and why we integrate with Buildium. GoLando is Canadian-owned and operated, and Canada is where we are launching first.

Ryan

What GoLando offers

GoLando is an AI-powered maintenance coordination platform for landlords and property management companies. Tenants text a maintenance issue; our AI handles the conversation, troubleshoots, flags emergencies and coordinates repairs with your approved vendors or, optionally, with the GoLando Vendor Network. You see everything in one dashboard.

Golando

Plans are tiered by portfolio size. On the pricing page, Starter is $39 per month or $390 per year, Pro is $69 per month or $690 per year, Pro+ is $149 per month or $1,490 per year, Mogul is $249 per month or $2,490 per year and Scale is $449 per month or $4,490 per year, all in Canadian dollars. Enterprise starts from $999 per month. Jobs distributed through the GoLando Vendor Network carry a network fee of 5 to 10%, and tenants and vendors never pay to use the platform. If you manage hundreds or thousands of units, start with our maintenance automation for property managers.

FAQ

How do I improve communication with contractors?

Give each job a written scope, an agreed access window, a deadline for an update and a single point of contact on your side. Keep vendor details and spending limits on file so approvals do not stall jobs. Automated dispatch and follow-up can handle the routine messages.

How quickly should I respond to a repair request?

Acknowledge immediately and set your own written timelines by urgency. Some Canadian cities set minimums for rental buildings: Ottawa expects a response within 24 hours for urgent requests and 7 days for non-urgent ones, and Mississauga uses 24 hours and 5 days. Check the rules for your municipality.

Do I need to replace my property management software to automate repair communication?

No. GoLando complements existing platforms and workflows by automating maintenance communication and coordination, and it integrates with Buildium. Your system of record stays where it is.

How do I keep after-hours calls under control?

Write an emergency list, classify every request against it, and schedule everything else for the next business day. Set on-call contacts by trade and a spending limit for emergencies. Where a request involves gas, smoke, fire or carbon monoxide, the tenant should call 911 first.

Sources

Let GoLando handle the maintenance texts. You keep the final say.

Tenants text one number. GoLando troubleshoots, flags emergencies and books your vendors.